Quality Value Energy Conservation  environmental protection

Building a brand with quality, winning the market with environmental protection, and promoting development with market and innovation

Product Detail

Multi-turn Electric Actuator

YG/YGM  YGD/YGMD
Intelligent multi turn electric actuator

Suitable for switch and adjustment types.

The maximum output torque of the integrated type is 3500N. m, and the maximum output torque of the gearbox is 15000N. m.

Mainly used for gate valves, globe valves, diaphragm valves, gate valves, etc.
Product Details

Main Technical Parameters


External power supply: three-phase 380VAC- 10%/+10%; 50Hz ± 1%

                                      Single phase 220VAC- 15%/+10%; 50Hz ± 1%,

Remote control power supply: internally supplied non regulated 24VDC power output, used to drive passive switching input.

Motor insulation level: Class F, switch type S2-15min, 60 times/hour;

                                     Adjustable S4-50% load connection rate, 1200 times/hour.

Design life: 10000 times of rated torque opening for switch type cycle testing.

                   Adjust the cycle test 500000 times to open at 50% of the rated torque.

Environmental temperature: -30~+70 (optional -60~+100)

Relative humidity: ≤ 95%

Protection level: IP68

Explosion proof grade: Ex db Ⅱ C T4 Gb

Dust explosion-proof level: Ex tb III C T135 ℃ Db

Analog output: 4-20mADC, load resistance ≤ 750 Ω

Switching output: 4 sets of relay output contacts, contact capacity 5A 250VAC, 5A 30VAC

The fieldbus (optional) supports MODBUS, PROFIBUS, CANOPEN, HART, RS485, and more.

Output torque: YG series 18N. m~3500N. m YGD series 300-15000N. m.

Connection part: Adopting flange connection according to national standards GB/12222-2005 and JB2920.

Appearance: The surface protection adopts electrostatic spray molding process.

The surface undergoes high-temperature solidification to form a hard coating film;

It has strong wear resistance, corrosion resistance, salt spray resistance, and other properties.

Lubrication: Inject maintenance free lubricating oil. Normally, there is no need to replace it.