Quality Value Energy Conservation  environmental protection

Building a brand with quality, winning the market with environmental protection, and promoting development with market and innovation

Product Detail

Split quarter-turn electric actuator

YGKT/YGKMT
Intelligent quarter-turn electric actuator

Suitable for switch and adjustment types.

Output angle 0~90 °.

The maximum output torque of the split type is 1000N. m, and the maximum output torque of the gearbox can reach 2500N. m.

The maximum safe distance of the split body can reach 30 meters, suitable for low-quality environments such as high temperature, low temperature, high humidity, and strong vibration.

Mainly used for supporting butterfly valves, ball valves, plug valves, and damper dampers.
Product Details

Main Technical Parameters


External power supply: three-phase 380VAC- 10%/+10%; 50Hz ± 1%;

                                      Single phase 220VAC- 15%/+10%; 50Hz ± 1%

Remote control power supply: internally supplied non regulated 24VDC power output, used to drive passive switching input.

Insulation level of motor: F level, switch type S2-15min, 60 times/hour;

                                          Adjustable S4-50% load connection rate, 1200 times/hour.

Design life: 10000 times of rated torque opening for switch type cyclic testing.

                    Adjust the cycle test 500000 times to open at 50% of the rated torque.

Environmental temperature: -30~+70

Relative humidity: ≤ 95%

Protection level: IP68

Explosion proof level: Ex db Ⅱ C T4 Gb

Dust explosion-proof level: Ex tb III C T135 ℃ Db

Analog output: 4-20mADC, load resistance ≤ 750 Ω

Switching output: 5 sets of relay output contacts with contact capacities of 5A 250VAC and 5A 30VAC

The fieldbus (optional) supports MODBUS, PROFIBUS, CANOPEN, HART, RS485, etc.

Output torque: Split type series 60N. m~1000N. m, equipped with gearbox series 1100N. m~2500N. m

Output angle: 0-90 degrees

Connection part: Adopt flange connection according to the national standard GB/12223-2005.

Appearance: The surface protection adopts electrostatic spray molding process.

The surface undergoes high-temperature solidification to form a hard coating film;

It has strong wear resistance, corrosion resistance, salt spray resistance, and other properties.

Lubrication: Inject maintenance free lubricating oil. Normally, there is no need to replace it.