Quality Value Energy Conservation  environmental protection

Building a brand with quality, winning the market with environmental protection, and promoting development with market and innovation

Product Detail

Combined Crank Type Quarter-turn Electric Actuator

YG/WQ or YGM/WQ
Intelligent combined quarter-turn electric actuator

Suitable for switch and adjustment types.

Output angle 0~90 °.

The maximum output torque is 450000N. m.

The split safety distance can reach up to 30 meters, suitable for low-quality environments such as high temperature, low temperature, high humidity, and strong vibration.

Mainly used for butterfly valves, ball valves, plug valves, and damper dampers with strong torque.
Product Details

Main Technical Parameters


External power supply: three-phase 380VAC- 10%/+10%; 50Hz ± 1%;

                                      Single phase 220VAC- 15%/+10%; 50Hz ± 1%

Remote control power supply: internally supplied non regulated 24VDC power output, used to drive passive switching input.

Insulation level of motor: F level, switch type S2-15min, 60 times/hour;

                                          Adjustable S4-50% load connection rate, 1200 times/hour.

Design life: 10000 times of rated torque opening for switch type cyclic testing.

                    Adjust the cycle test 500000 times to open at 50% of the rated torque.

Environmental temperature: -30~+70 (optional -60~+100)

Relative humidity: ≤ 95%

Protection level: IP68

Explosion proof level: Ex db Ⅱ C T4 Gb

Dust explosion-proof level: Ex tb III C T135 ℃ Db

Analog output: 4-20mADC, load resistance ≤ 750 Ω

Switching output: 4 sets of relay output contacts, contact capacity 5A 250VAC, 5A 30VAC

The fieldbus (optional) supports MODBUS, PROFIBUS, CANOPEN, HART, RS485, etc.

Output torque: 300N. m~45000N. m.

Output angle: 0-90 degrees.

Connection part: Adopting flange connection according to national standards GB/12222-2005 and JB2920.

Appearance: The surface protection adopts electrostatic spray molding process.

The surface undergoes high-temperature solidification to form a hard coating film;

It has strong wear resistance, corrosion resistance, salt spray resistance, and other properties.

Lubrication: Inject maintenance free lubricating oil. Normally, there is no need to replace it.